In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace
An in wall fireplace provides an elegant and polished appearance without the expense of a mantle. It is one of the easiest electric fireplaces to install.
There are a few things to consider before buying an in-wall fireplace. Follow these tips to make the most of your purchase.
Height
It might seem like an easy question however, determining the height of your fireplace is among the most important decisions you'll make. This is because the height of your fireplace will impact everything from how it fits in a room to how easily it can be seen. The fireplace may appear odd if it is raised too high. It will also take away from its attractiveness. On the other hand having your fireplace too low will cause it to disappear in the wall space.
Electric fireplaces can be placed at various heights. For instance, most people prefer to place their fireplaces on the eye level from a sitting position. This typically requires a height of between 40 and 42 inches from the floor to the bottom of the fireplace. Some people place their fireplaces beneath their TVs. This can be an attractive option.
The height of your fireplace is contingent on a number of factors such as the size and length of the wall you want to put it on. The larger a room is larger, the more spacious it will be which could mean that you are able to fit a bigger fireplace in it. The length of the wall is also important since a wall that is larger can support a fireplace that is larger.
How you intend to utilize your fireplace is an important aspect. If you intend to use it for decorative purposes, a smaller size will be the best. If you're planning to heat your home using it, you'll need ensure that the fireplace is tall enough to satisfy local codes and safety standards.
It is essential to choose the appropriate height for your fireplace so that it can fit into your decor and be simple to clean or fill. If you're not sure what size to choose it is always a good idea to reach out to an expert fireplace installer for assistance. They can advise on the best height for your fireplace, based on their knowledge and the design of your home.
Depth
A fireplace's depth is important to know if you want to install it in a recessed position. If you plan to cut into the wall, ensure that you have enough space to accommodate your fireplace's interior design (the space for the smoke shelf above the firebox and the flue that rises from the roof). You should also consider the space you have available for the surround and if you want a fireplace mantle.
A lot of the latest electric fireplaces have the depth of being almost concealed, giving them a "built-in" appearance. This type of wall fireplace made from electric is best demonstrated by the Panorama BI Deep series. The model is 5.8-inch depth that lets viewers to see the flames, ember bed, and not the frame. It is also equipped with a range of media packages including natural-looking driftwood logs that look like driftwood white pebbles, crystals made of clear glass that reflect the flames and enhance the ember bed.
Wall-mounted gas fireplaces are also available in shallow and deep models. When determining the depth of your fireplace, it is crucial to keep in mind that these units are supplemental heat sources and should be properly vented by a trained professional. When determining the depth of a gas fireplace you must think about the length of the vent pipe as well as the size of the chimney.
If you decide to go with a surface mount or a one-piece installation, it's important to read and follow the manufacturer's instructions when installing your fireplace. A professional installer is recommended in the majority of instances. It is also a good idea to have a second person in the house to install an fireplace.
The addition of an in-wall fireplace space to your home is an excellent option to enhance it and add ambiance. It can also lower your heating costs. Furthermore, it's an excellent option if you are unable to fit traditional fireplaces in your home because of the space restrictions or the location of an existing chimney.
Surface Mount
Surface mounts are a great option if you don't want to or aren't able to cut into the wall to mount an electric fireplace. They also provide a sleek, built-in look. Some models, such as the Allusion line, can even be installed partially recessed into the wall without compromising the heat output or aesthetics.
To start the installation process, you must determine the area where you want your fireplace to be located and mark the area with a pencil along the wall where the bracket will be put. Utilize a stud-finder to find the studs and place the brackets in front of at least one stud for stability. If a stud cannot be reached or is not suitable for your fireplace, you can make use of drywall anchors for support.
After you have marked the location of mounting brackets on the wall, use a power drill to install them and make sure they are in alignment with the studs. If possible, connect each bracket to a stud for security and strength, but you could also use plastic anchors if necessary. Once the mounting brackets have been installed move the fireplace and hang it from the bracket. Once the fireplace is installed ensure that it is level.
Before you proceed with the installation, plug in your fireplace and ensure that all features are working correctly. Turn on the fire, and then start the flames. play around with heat, ember bed lights, etc. When you're satisfied with the results you can now install your floating mantel.
Depending on the model of your fireplace, you'll have to connect the wire connection to the appliance wire connector at the bottom of the mantel or in the event that your fireplace has slots or hooks on the back connect them to the slots on the wall mounting brackets. After you've completed this step make sure to consult the user manual for directions on how to remove the glass front panel from the opening and replace it.
After you've removed the front panel of your fireplace and placed it into the opening, follow your instructions in the manual to complete the installation by replacing the glass front and adjusting the height if necessary. If your fireplace has ember bed media spread it over the top grate for a more natural appearance. Then secure it with the screws included.
Plug-In
These fireplaces with electric technology do not require vents or chimneys like traditional wood-burning ones. Plugged into a standard outlet they provide supplemental heat to rooms up 400 square feet. You can also alter the ambiance with multiple settings for flame and heat. Some models feature LED lighting effects that emphasize the fire and embers. Some models have the top grille grate which conceals manual controls, but easily pops open to reveal pushbuttons to set the desired setting.
Electric fireplaces with plug-ins can be hung directly on walls or installed into the wall for an elegant look. They are generally easier to install than mantel fireplaces. Some have pedestal bases that permit you to put the fireplace on a flat surface such as a dresser or buffet. There is a remote control, mounting hardware, and log set. These electric fireplaces can include both heat and flame options, which can be shut off to provide a warm and cozy atmosphere.
Some models have adjustable privacy glass that you can quickly change from fully transparent to partially. These models are popular for walls that divide entertainment areas like dining and living rooms. These models can be utilized in bedrooms, where adding a fireplace is a cost-effective way to warm a room and ensure privacy.
Plug-in electric fire places do not require hardwiring, but they must be plugged into an area that can support their weight. Some models come with a kit which includes an already wired cord and specially designed bracket to make the installation process simpler. This kit can be used for either drywall or concrete installation.
If you decide to install your wall-mounted electric fireplace, be sure that it is close to an outlet. Depending on the model that you choose, plug-in electric fireplaces may be connected to outlets that are connected to the same circuit, or a dedicated one for your electric fireplace. It is best to choose an exclusive circuit to ensure that no other appliances in the home will run on the same voltage and could cause a trip to your breakers.